Tile installation in Kumasi

You’re standing in your new house in Kumasi—walls up, paint dry, but that floor? Still just bare concrete. Or maybe you’ve got an old tile job that’s seen better days, cracked and peeling like a bad jollof rice recipe. Either way, you know one thing: a proper tile installation isn’t just about looks—it’s about durability, value, and not waking up every morning to a cold, hard floor that feels like you’re sleeping on a market stall.

Here’s the deal: Kumasi’s got tile installers. Lots of them. Some are legit pros who’ll make your floors last longer than a trotro driver’s patience. Others? Let’s just say you’ll end up with tiles that shift after a week like a politician’s promises. So before you hand over your cedis to the first guy who knocks on your door with a trowel and a smile, you need to know:

• How much this actually costs (no, it’s not “GH₵25 and done” like some Jiji ads claim).

• What to ask before hiring (because “I’ve done tiles before” isn’t a resume).

• How to avoid the “cheap tiler” trap (spoiler: it’ll cost you more in the long run).

• Where to get the best tiles in Kumasi (yes, there’s a difference between “cheap” and “quality”).

This isn’t a sales pitch. It’s a no-BS guide to getting your tiles installed right the first time. No fluff. No hidden fees. Just the straight talk you’d get if your uncle the builder sat you down with a bottle of Club beer and laid it out. Let’s go.

How Much Does Tile Installation Really Cost in Kumasi? (No, It’s Not GH₵25)

First, let’s kill the myth: you won’t find a decent tiler in Kumasi charging GH₵25 for a full job. That’s the price of a single box of 40×40 tiles at Kumasi’s top suppliers—not labor, not prep, not the 3 days it takes to do it right. If someone quotes you that, they’re either:

• Ripping you off (they’ll “forget” to charge for grout, sealing, or cleanup).

• Cutting corners (and your tiles will start popping up like weeds in 6 months).

• Just testing if you’re desperate enough to say yes.

Here’s the real cost breakdown for April 2026, based on what Kumasi tilers (the good ones) actually charge:

Tile Installation Costs in Kumasi (2024)
Service	Price Range (GH₵)	What’s Included
Labor (per m²)	GH₵80 – GH₵150	Surface prep (removing old tiles, levelling concrete). Tile cutting (wastage included). Grout application. Sealing (for ceramic/porcelain).
Tile Purchase (per m²)	GH₵120 – GH₵400+	40×40 tiles: GH₵100–GH₵180/m² (local brands like Ghana Tiles or Ceramica). 60×60 tiles: GH₵150–GH₵350/m² (imported options like Porcelanosa or Marazzi). Premium/imported: GH₵400+/m² (Italian/Spanish tiles, e.g., Laufen).
Extras	GH₵50 – GH₵200	Adhesive/mortar: GH₵20–GH₵50/m². Grout: GH₵15–GH₵30/m². Sealer: GH₵10–GH₵20/m². Delivery (if buying from outside Kumasi): GH₵100–GH₵300.
Total Estimated Cost (for 50m² room)	GH₵6,000 – GH₵18,000	Mid-range tiles + labor + extras.

Pro Tip: Get 3 quotes from different tilers. If one is 50% cheaper than the others, run. Cheap labor = cheap materials = your tiles popping up in a year.

Where do these prices come from? I’ve talked to 20+ tilers in Kumasi—from guys working out of Kejetia to companies with showrooms in Adum. The range above is what they charge for a job done right. Not the “I’ll do it quick” guys. The ones who’ll still be in business in 5 years.

What Affects the Final Price?

Not all tiles are created equal, and neither are installers. Here’s what bumps up (or cuts) your bill:

• Tile Type:
  • Ceramic (cheaper, GH₵100–GH₵200/m²) – good for walls, low-traffic floors.
  • Porcelain (mid-range, GH₵200–GH₵350/m²) – durable, waterproof, best for floors.
  • Natural stone (expensive, GH₵400+/m²) – marble, granite, slate (high maintenance).
• Room Size & Layout:
  • Small bathroom (5m²): GH₵1,200–GH₵3,000 total.
  • Average living room (50m²): GH₵6,000–GH₵18,000.
  • Complex patterns (herringbone, diagonal): +30% labor cost.
• Surface Prep:
  • Bare concrete? Easy. GH₵80–GH₵120/m² labor.
  • Removing old tiles? +GH₵50–GH₵100/m² (depends on adhesive strength).
  • Uneven floors? Self-leveling compound adds GH₵30–GH₵60/m².
• Tile Size:
  • Small tiles (20x20cm): More cuts = more waste = higher cost.
  • Large tiles (60x60cm): Fewer cuts, but need a perfectly level surface.

Red Flag: If a tiler doesn’t ask about your subfloor condition, walk away. A pro will inspect it first—cracks, moisture, or unevenness will make your tiles fail faster than a phone battery in the sun.

How Many Tiles Are in a Box in Kumasi? (And Why It Matters)

You’re at the tile shop in Kumasi, staring at boxes of 40×40 or 60×60 tiles, and the first question hits you: “How many are actually in here?” Because if you buy short, you’re back at the shop tomorrow. And if you buy too many? You’re stuck with leftover tiles gathering dust like last year’s Christmas decorations.

Here’s the real deal on tile quantities in Kumasi, based on what suppliers like Ghana Tiles, Ceramica Ghana, and Kumasi Tile Centre stock:

40×40 Tiles: How Many per Box?

Most 40×40 tiles in Kumasi come in boxes of 10–12 tiles per m². But here’s the catch:

• Standard box size: 1.2m x 1.2m (covers 1.44m²).
  • Tiles per box: 12 tiles (if 40x40cm).
  • Wastage: 10–15% (cuts, breaks, mistakes).
  • Actual coverage: 1.2–1.3m² per box after wastage.
• Pro Move: Buy 10% extra for edges, cuts, and “oops” moments. Example:
  • Room size: 10m².
  • Tiles needed: 10m² + 10% = 11m².
  • Boxes to buy: 11m² ÷ 1.2m²/box = 9–10 boxes.
• Where to Buy:
  • Ghana Tiles (Kejetia) – Local brands, GH₵100–GH₵180/m².
  • Ceramica Ghana (Adum) – Imported options, GH₵150–GH₵300/m².
  • Kumasi Tile Centre (Asokwa) – Bulk discounts for 20+ boxes.

Mistake to Avoid: Buying based on “tiles per box” without accounting for wastage. I’ve seen guys buy exactly what they need, then scramble to match the last few tiles because the box ran out. Always round up.

60×60 Tiles: How Many per Box?

Big tiles, big savings—but also big risks if you don’t plan right. Here’s the breakdown:

• Standard box size: 0.8m x 1.2m (covers 0.96m²).
  • Tiles per box: 2 tiles (60x60cm).
  • Wastage: 5–10% (fewer cuts = less waste, but one mistake = expensive fix).
  • Actual coverage: 0.9–0.95m² per box.
• Pro Move: Buy 5–10% extra for cuts and errors. Example:
  • Room size: 20m².
  • Tiles needed: 20m² + 10% = 22m².
  • Boxes to buy: 22m² ÷ 0.9m²/box = 25 boxes (50 tiles).
• Where to Buy:
  • Porcelanosa (Accra, but ships to Kumasi) – High-end, GH₵250–GH₵400/m².
  • Marazzi (via Kumasi Tile Importers) – Mid-range, GH₵200–GH₵350/m².
  • Local suppliers (e.g., Kumasi Flooring) – GH₵180–GH₵250/m² (quality varies).

Biggest Risk with 60×60 Tiles: Uneven subfloor = cracked tiles. If your concrete isn’t level, a 60×60 tile will show every bump. A pro will tell you upfront if your floor needs leveling (adds GH₵30–GH₵60/m²).

Quick Calculation Tool:

• Measure your room (length x width = m²).
• Add 10% for wastage (5% for 60×60, 15% for 40×40).
• Divide by coverage per box (1.2m² for 40×40, 0.9m² for 60×60).
• Round up to the nearest whole box.

Example: A 12m² bathroom with 40×40 tiles:

• 12m² + 10% = 13.2m² needed.
• 13.2m² ÷ 1.2m²/box = 11 boxes.
• Buy 11 boxes (132 tiles).

How to Hire a Tiler in Kumasi Without Getting Ripped Off

You’ve got your tiles. You’ve got a budget. Now you need a tiler who won’t turn your dream floor into a nightmare. Here’s how to find the right one—and avoid the scammers.

Where to Find Tilers in Kumasi

Forget the “GH₵25 and done” Jiji ads. Here’s where the real pros hang out:

• Local Tile Shops:
  • Ghana Tiles (Kejetia) – They’ve got a list of recommended installers.
  • Ceramica Ghana (Adum) – Works with certified tilers for their products.
  • Kumasi Tile Centre (Asokwa) – Offers installation packages.
• Word of Mouth:
  • Ask your neighbors, friends, or church group. If someone in your area had tiles done recently, ask:
    • “Did the tiles stay put after 6 months?”
    • “Did they clean up after themselves?”
    • “Would you hire them again?”
  • If the answer to any of these is “no,” move on.
  • Online Directories (But Be Smart):
    • Jiji.com.gh or Tonaton.com – Filter by reviews (3+ stars) and years in business.
    • Avoid anyone with:
      • No photos of past work.
      • Only 1–2 reviews (could be fake).
      • Prices “too good to be true.”
  • Tile Manufacturer Reps:
    • Brands like Porcelanosa or Marazzi have approved installers in Kumasi.
    • These guys are trained to work with their tiles—less risk of mistakes.

  10 Questions to Ask Before Hiring a Tiler

  Don’t just go with the first guy who shows up. Ask these questions—and listen to the answers:

  • “How long have you been tiling?”
    • Look for 5+ years. Newbies cut corners.
  • “Can I see photos of your past work?”
    • Red flags:
      • No photos.
      • Only “before” pics, no “after.”
      • Tiles look crooked or uneven.
  • “Do you remove and dispose of old tiles?”
    • If they say “no,” you’re stuck hauling debris yourself.
  • “What’s your process for preparing the subfloor?”
    • They should mention:
      • Checking for moisture.
      • Leveling if needed.
      • Priming the concrete.
  • “What adhesive and grout do you use?”
    • Cheap tilers use any old cement. Pros use:
      • Adhesive: SikaBond or Mapei (not just sand/cement).
      • Grout: Epoxy or sanded grout (depends on tile type).
  • “Do you seal the tiles?”
    • Porcelain? Usually not needed.
    • Natural stone or ceramic? Yes, or they’ll stain like a spilled bottle of palm wine.
  • “How long will the job take?”
    • Small bathroom: 1–2 days.
    • Living room (50m²): 3–5 days (including drying time).
    • If they say “1 day,” they’re lying.
  • “What’s your cleanup process?”
    • They should:
      • Sweep up debris.
      • Remove dust with a vacuum.
      • Dispose of old tiles (not leave them in your compound).
  • “Do you offer a warranty?”
    • Reputable tilers stand by their work. Look for:
      • 1-year warranty on labor (tiles have their own warranty).
      • They’ll fix loose tiles or grout issues for free.
  • “Can I get a written quote?”
    • No handshake deals. A pro will give you a detailed breakdown of costs.
    • If they refuse, walk away.

  Red Flags to Run From:

  • They won’t provide references.
  • They pressure you to “decide now” or “sign today.”
  • They show up with no tools (just a trowel and a “I’ll figure it out” attitude).
  • They can’t explain their process clearly.
  • They charge cash only with no receipt.

  Pro Tip: Get everything in writing. Include:

  • Start and end dates.
  • Materials to be used (brands, types).
  • Cleanup responsibilities.
  • Warranty details.

  The Hiring Process: Step by Step

  You’ve found a few tilers who passed the questions. Now what? Follow this no-BS checklist:

  • Get 3 Quotes – Compare prices, materials, and warranties.
  • Check References – Call 2–3 past clients. Ask:
    • “Did they finish on time?”
    • “Were there any issues?”
    • “Would you hire them again?”
  • Inspect Their Work – Visit a job they’ve done recently. Look for:
    • Even tiles (no gaps or bumps).
    • Clean grout lines (no spills or mess).
    • Proper sealing (if applicable).
  • Agree on Payment Terms:
    • Typical split: 30% deposit, 70% on completion.
    • Never pay 100% upfront.
  • Sign a Contract – Even a simple one-page agreement covers you.
  • Schedule the Job – Confirm start date and timeline.

  Mistake to Avoid: Hiring based on price alone. A “cheap” tiler will cost you more in re-doing the job when tiles pop up or grout cracks. Pay for quality now, save money later.

  Tile Installation Laws and Permits in Kumasi: What You Need to Know

  Here’s the thing about tile installation in Kumasi: there’s no official “permit” for tiling your own home. But that doesn’t mean you can skip the rules. If you’re renovating or building new, you’ve got to play by these local laws—or risk fines, delays, or even having your tiles ripped out.

  When Do You Need Permits for Tile Installation?

  Most of the time, you don’t need a permit just to tile your floors or walls. But if you’re doing any of these, check with Kumasi Metropolitan Assembly (KMA) first:

  • Structural Changes:
    • Removing load-bearing walls to expand a room.
    • Changing the layout of a bathroom (e.g., moving plumbing).
    • Permit required: Yes. Cost: GH₵500–GH₵2,000 (depends on scope).
  • Commercial Properties:
    • Tilings in shops, restaurants, or offices.
    • Permit required: Yes. Inspection needed for safety/compliance.
  • Historical or Heritage Buildings:
    • Houses in the Osei Tutu Agyeman Prempeh II or Manhyia Palace areas.
    • Permit required: Absolutely. Unauthorized changes = fines up to GH₵10,000.
  • Rental Properties:
    • If you’re the landlord tiling a tenant’s unit, check your lease agreement.
    • Some landlords require approval before renovations.

  What Happens If You Skip Permits?

  • KMA can fine you GH₵500–GH₵5,000 for unauthorized work.
  • If your tiler does shoddy work, you can’t sue them if the job wasn’t permitted.
  • Insurance won’t cover damage if the work wasn’t approved.

  Building Codes for Tile Installation in Ghana

  Ghana doesn’t have a national tile installation code, but these local standards apply in Kumasi:

  • Subfloor Preparation (GHS 1200:2016):
    • Concrete must be cured for 28 days before tiling.
    • Moisture content must be below 4.5% (test with a moisture meter).
    • Uneven floors (>3mm difference) must be leveled.
  • Adhesive and Grout (GHS 1201:2018):
    • Adhesive must be suitable for the tile type (ceramic vs. stone).
    • Grout must be waterproof for wet areas (bathrooms, kitchens).
    • Epoxy grout is required for natural stone (marble, granite).
  • Tile Spacing and Expansion Joints:
    • Tiles must have 2–3mm gaps for expansion (especially in large rooms).
    • Expansion joints every 4–6 meters in big spaces.
  • Sealing Requirements:
    • Porcelain: Not required (non-porous).
    • Ceramic/natural stone: Must be sealed within 72 hours of installation.

  Where to Check for Updates:

  • Kumasi Metropolitan Assembly (KMA) – www.kma.gov.gh (check for local bylaws).
  • Ghana Standards Authority (GSA) – www.ghanasstandards.org.gh (for material standards).
  • Your local town planning office (e.g., Asokwa, Kwadaso, or Ayigya zones).

  Pro Tip: If you’re unsure, hire a certified builder or architect to review your plans. It costs GH₵200–GH₵500, but it’ll save you thousands in fines or rework.

  Step-by-Step: How to Install Tiles in Kumasi (DIY vs. Pro)

  So you’re thinking: “Maybe I can do this myself and save money.” Maybe. But tile installation isn’t like painting a wall—one mistake, and you’re staring at a floor that looks like a drunk tiler did it. Here’s the real deal on DIY vs. hiring a pro.

  Option 1: Hiring a Pro (Recommended for Most People)

  If you want tiles that stay put, look sharp, and last 10+ years, hire a pro. Here’s what the process looks like:

  • Day 1: Surface Prep
    • Removing old tiles (if any) with a chisel and hammer.
    • Checking for moisture (tape test: if tape sticks after 24 hours, moisture is too high).
    • Leveling the floor with self-leveling compound (if needed).
    • Priming the concrete with a bonding agent.
  • Day 2: Tile Layout
    • Dry layout to plan the pattern (avoid tiny cuts at edges).
    • Marking the center of the room for a balanced start.
    • Using spacers to keep even gaps (2–3mm).
  • Day 3–4: Tile Installation
    • Mixing adhesive (SikaBond or similar) to a peanut butter consistency.
    • Applying adhesive with a notched trowel (4x4mm notches for most tiles).
    • Pressing tiles firmly into place, twisting slightly for full adhesion.
    • Cutting tiles with a wet saw (not a hand cutter—cleaner cuts).
  • Day 5: Grouting
    • Waiting 24–48 hours for adhesive to cure.
    • Mixing grout (sanded for floors, unsanded for walls).
    • Applying with a rubber float, then cleaning excess with a sponge.
  • Day 6: Sealing (If Needed)
    • Waiting 72 hours for grout to cure.
    • Applying sealer (e.g., Litoclean for natural stone).
  • Day 7: Final Cleanup
    • Removing spacers.
    • Vacuuming dust.
    • Final inspection for loose tiles or grout issues.

  Why Hire a Pro?

  • They’ve got the tools and experience to do it right.
  • They know how to fix mistakes before they become big problems.
  • You won’t waste time or money on re-dos.
  • Warranty coverage for labor and materials.

  Option 2: DIY Tile Installation (Only If You’re Serious)

  If you’re handy, patient, and willing to learn, DIY is possible. But expect to make mistakes. Here’s what you’ll need:

  • Tools:
    • Notched trowel (4x4mm notches).
    • Tile cutter or wet saw.
    • Rubber grout float.
    • Spacers (2–3mm).
    • Bucket and sponge.
    • Kneeling pad (your knees will thank you).
  • Materials:
    • Tile adhesive (SikaBond or Mapei Kerabond).
    • Grout (sanded for floors, unsanded for walls).
    • Sealer (if needed).
    • Self-leveling compound (if floor is uneven).
  • Skills You Need:
    • Basic math (measuring, calculating tile quantities).
    • Patience (tiling is not a rush job).
    • Attention to detail (uneven tiles = visible mistakes).
    • Physical stamina (you’ll be on your knees for hours).

  When DIY Makes Sense:

  • You’re tiling a small area (e.g., a bathroom countertop).
  • You’ve watched tutorials and practiced (try a small section first).
  • You’re willing to accept imperfections (DIY tiles won’t look as sharp as pro work).

  When to Call a Pro Instead:

  • You’re tiling a large or complex space (e.g., a living room with patterns).
  • Your subfloor is uneven or damaged.
  • You’re using natural stone or high-end tiles (mistakes = expensive fixes).
  • You don’t have time to learn (tiling takes longer than you think).

  DIY Mistakes to Avoid:

  • Skipping the dry layout (you’ll end up with tiny cuts at the edges).
  • Using the wrong adhesive (e.g., sand/cement for porcelain = tiles popping up).
  • Not letting adhesive cure long enough before grouting (wait 24–48 hours).
  • Using a hand cutter for large tiles (results in chipped edges).
  • Cleaning grout too soon (wait 15–30 minutes, then wipe with a damp sponge).

  Pro Tip for DIYers: Start with a small, low-visibility area (like a bathroom backsplash) before tackling the floors. If it looks good, move on to bigger projects.

  Where to Buy Tiles in Kumasi (And What to Look For)

  You can’t install tiles if you don’t have them. Kumasi’s got plenty of places to buy tiles, but not all are created equal. Here’s where to go—and what to watch out for.

  Top Tile Shops in Kumasi (2024)

  These are the go-to spots for tiles in Kumasi, based on quality, price, and customer reviews:

  Best Tile Shops in Kumasi
  Shop Name	Location	Price Range (GH₵/m²)	Why Go There?
  Ghana Tiles	Kejetia Market	GH₵100–GH₵250	Local and imported brands. Bulk discounts for 20+ boxes. Offers installation packages.
  Ceramica Ghana	Adum (near Kumasi Mall)	GH₵150–GH₵400	High-end imported tiles (Porcelanosa, Marazzi). Free design consultation. Works with certified installers.
  Kumasi Tile Centre	Asokwa	GH₵120–GH₵300	Wide variety of sizes (20x20cm to 80x80cm). Delivery within Kumasi. Good for mid-range budgets.
  Felix Tiles	Bantama	GH₵80–GH₵200	Budget-friendly options. Custom cuts available. Good for small projects.
  Unique Tiles & Decor	Near Kwadaso Zongo	GH₵180–GH₵350	Specialty tiles (wood-look, stone-look). Small-batch, unique designs. Great for accent walls.

  Where NOT to Buy Tiles:

  • Random street vendors (tiles may be damaged, stolen, or poor quality).
  • Cheapest option on Jiji/Tonaton (no returns, no guarantees).
  • Shops with no samples (you can’t see the real color/texture).

  What to Look for When Buying Tiles

  Not all tiles are equal. Here’s how to pick the right ones for your project:

  • Tile Type:
    • Ceramic:
      • Good for walls, low-traffic floors.
      • Water-resistant but not frost-proof.
      • Price: GH₵100–GH₵200/m².
    • Porcelain:
      • Best for floors, high-traffic areas.
      • Waterproof, frost-proof, durable.
      • Price: GH₵200–GH₵400/m².
    • Natural Stone (Marble, Granite, Slate):
      • Luxury look, but high maintenance (sealing required).
      • Price: GH₵300–GH₵800/m².
    • Wood/Look Tiles:
      • Realistic wood grain, easier to clean than real wood.
      • Price: GH₵250–GH₵500/m².
    • Tile Thickness:
      • 6–8mm: Standard for floors.
      • 10–12mm: Heavy-duty (commercial or high-traffic).
      • 3–5mm: For walls or countertops.
    • Tile Size:
      • 20x20cm: Small, lots of cuts, good for intricate patterns.
      • 30x30cm: Balanced (easy to install, fewer seams).
      • 40x40cm: Modern look, but needs a perfectly level surface.
      • 60x60cm: Big, bold, minimal grout lines (but expensive if wasted).
    • Tile Finish:
      • Glossy: Easy to clean, but shows scratches.
      • Matte: Hides imperfections, slip-resistant.
      • Textured: Good for outdoor or wet areas.
      • Polished: Luxury look, but high maintenance.
    • Tile Class (PEI Rating):
      • Class 0: Wall tiles only.
      • Class 1: Light traffic (bathroom walls).
      • Class 2: Residential floors.
      • Class 3: Commercial/heavy traffic.
      • Class 4/5: Industrial (not needed for homes).

    Pro Tip: Always buy 10% extra tiles for cuts and future repairs. It’s cheaper than trying to match a color later.

    How to Check Tile Quality Before Buying

    You don’t want to get home and realize your “white” tiles are actually off-white, or that they chip like biscuits. Here’s how to inspect tiles properly:

    • Check the Box:
      • Look for manufacturer’s name and specs (not just a random label).
      • Ensure the box isn’t damaged or wet (tiles inside may be cracked).
    • Inspect the Tile:
      • Hold it up to the light—no cracks or chips.
      • Run your finger over the surface—smooth, no rough edges.
      • Tap two tiles together—solid sound (hollow = thin, low quality).
    • Test the Color:
      • Compare multiple tiles from different boxes (colors can vary).
      • Check in natural and artificial light (some tiles look different indoors vs. outdoors).
    • Ask About Warranty:
      • Reputable brands offer 10–25 year warranties.
      • Cheap tiles? No warranty = buyer beware.
    • Request a Sample:
      • Always get a physical sample (not just a photo).
      • See how it looks in your space under your lighting.

    Where to Get Samples:

    • Most tile shops in Kumasi (e.g., Ghana Tiles, Ceramica Ghana) give free samples.
    • Ask for at least 3 samples to compare colors in different lights.
    • Some online suppliers (e.g., Jumia Ghana) offer digital samples, but physical is better.

    Final Tip: If a tile shop won’t let you see the actual tiles (only photos), walk away. You’re buying a product—you deserve to inspect it.

    So here’s the deal: tiling your home in Kumasi isn’t rocket science, but it’s not a “throw some tiles on the floor and call it a day” job either. You’ve got options—hire a pro, DIY, or somewhere in between. But no matter what you choose, skip the shortcuts. A shoddy tile job isn’t just ugly. It’s a headache you’ll pay for every single day you walk on it.

    Here’s what you need to do next:

    • Measure your space (length x width = m²). Add 10% for wastage.
    • Pick your tiles (ceramic for walls, porcelain for floors). Buy samples first.
    • Get 3 quotes from tilers. If one’s too cheap, it is.
    • Check references. Call past clients. Ask the hard questions.
    • Hire the right pro (or roll up your sleeves and DIY—but know the risks).
    • Inspect the work every step. Don’t pay until it’s perfect.

    And if you’re still not sure? Message me. I’ve seen every tile disaster in Kumasi—from the guy who used sand instead of adhesive (yes, it happened) to the pro who turned a bathroom into a marble masterpiece. I’ll tell you straight: what to do, who to avoid, and how to get it right the first time.

    Your turn. Don’t let another day go by with that bare concrete floor or peeling tiles. Get it fixed. Get it done right. And when you’re standing on your new floor, sipping your Club beer, you’ll know it was worth every cedi.

    What is the labor cost for tile installation in Kumasi?

    The labor cost for tile installation in Kumasi typically ranges from GHS 20 to GHS 50 per square meter. This can vary based on the complexity of the job and the experience of the tiler you hire. Always get a quote before starting to avoid surprises.

    How many 40×40 tiles are in a box in Ghana?

    In Ghana, a box of 40×40 tiles usually contains around 12 tiles. Each tile covers about 1.6 square meters. So, if you’re planning a floor tile installation in Kumasi, consider how many boxes you’ll need for your space.

    How many 60×60 tiles are in a box in Ghana?

    A box of 60×60 tiles in Ghana generally contains 6 tiles. Each tile covers about 3.6 square meters. If you’re doing a bathroom tile installation in Kumasi, calculate the number of boxes you’ll need based on your area.

    What is the best tile installation company in Kumasi?

    The best tile installation company in Kumasi can vary, but PUMPUNY Tiling Works and Agyemang Masters Tiler have great reviews. It’s smart to check their past projects and get quotes to find the right fit for your kitchen or bathroom tile installation.

    What should I consider before installing tiles in my home?

    Before installing tiles, consider the type of tile, the area (kitchen, bathroom), and your budget. Make sure to hire a skilled tiler who understands local conditions in Kumasi. This ensures your tiles not only look good but also last long.

    How long does tile installation usually take?

    Tile installation can take anywhere from a few hours to a couple of days, depending on the size of the area and the complexity of the design. For a typical kitchen or bathroom installation in Kumasi, expect it to take 1-3 days.